Fail-safe standstill monitors-schmersal vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

Application: Fail-safe standstill monitors-schmersal vietnam
AZR 31 S1 and FWS range standstill monitors serve for fail-safe registration of machine standstill and control of safety solenoid interlocks on sliding, hinged or removable guard doors. Depending on the external circuits arrangements, the protection system can be secured up to the requirements of Control Category 4 to EN 954-1 in combination with an AES or AZR range safety monitoring module.


[more…]

Search according to features

AZR31S1 Fail-safe standstill monitors-schmersal vietnam
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V

SSW 301HV Fail-safe standstill monitors-schmersal vietnam
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN 954-1

FWS 3505-2204 Fail-safe standstill monitors-schmersal vietnam
Detects standstill using 2 impulse sensor(s)
For more information about this product group, click here.

FWS 1205 Fail-safe standstill monitors-schmersal vietnam
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs

FWS 1206 Fail-safe standstill monitors-schmersal vietnam
• Detects standstill using 1 or 2 impulse sensors
• Uses additional standstill signal, e.g. PLC as second input channel
• 2 safety contacts
• 2 Signalling outputs

FWS 2105 Fail-safe standstill monitors-schmersal vietnam
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs

FWS 2106 Fail-safe standstill monitors-schmersal vietnam
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs

FWS 2505 Fail-safe standstill monitors-schmersal vietnam
• Detects standstill using 2 impulse sensor(s)
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs

FWS 2506• Detects standstill using 2 impulse sensor(s)• 4 safety contacts• 1 Signalling output• 2 additional transistor outputs