EA2-TX-100-HD | Michell Vietnam | Easidew Transmitter

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

EA2-TX-100-WX | B393-040 | Easidew Transmiter Michell | Michell Vietnam Easidew B393-040 Dewpoint Performance
Measurement Range	-100 to +20°Cdp
Accuracy	±2°Cdp
Response Time	5 mins to T95 (dry to wet)
Repeatability	0.5°Cdp
Calibration	Traceable 13 point calibration
Electrical Specifications
Output Signal	4-20 mA (2-wire connection, current source) User-configurable over range
Output	Dew point, moisture content in ppmV
Analog Output Scaled Range	Dew point: -100 to +20°C Moisture content in gas: 0-3000ppmV Non-standard available upon request
Supply Voltage	12 to 28 V DC
Load Resistance	Max 250 Ω @ 12 V (500 Ω @ 24 V) 500 Ω @ 24 V
Current Consumption	20 mA max
CE Marked	Certified
Operating Specifications
Operating Temperature	-40 to + +60°C
Operating Pressure	45MPa (450 barg/6500 psig) max
Overpressure Rating	x2 operating pressure 90 MPa (900 barg)
Flow Rate	1 to 5 Nl/min mounted in standard sampling block; 0 to 10m/sec direct insertion insertion
Temperature Coefficient	Temperature compensated across operating temperature range
Mechanical specifications
Ingress Protection	IP66 in accordance with standard BS EN 60529:1992 NEMA 4 in protection accordance with standard NEMA 250-2003
Housing Material	316 stainless steel
Dimensions	L=132mm x ø45mm (with connector)
Filter (Sensor Protection)	Standard: HDPE guard <10µm Optional:  316 stainless steel sintered guard <80µm
Process Connection and Material	5/8" - 18 UNF 316 stainless steel
Weight	150g
Interchangeability	Fully interchangeable transmitter
Electrical Connections	Hirschmann GDS series (DIN 4350-C)
Diagnostic Conditions (Factory Programmed)	Condition Sensor fault Under-range dew point Over-range dew point Output23 mA4 mA20 mA