Canneed Vietnam | Canneed Intrument Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

	CTG-300 Coating Thickness Gauge
	The Canneed's "CTG-300 Coating Thickness Gauge", equipped with aerodynamic levitation measuring head, provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans, and also tinplate. The system provides the following benefits to the Can and End manufacturer:Reduced lacquer consumption, Greater product quality, Better operating efficiencies and Lower spoilage.

	VRM-4C Video Rivet Monitor
	VRM-4C Video Rivet Monitor is a video camera system to observe and evaluate the rivet's profile images of the ends. The end is cutting through the rivet by the low speed saw LSS-100, the rivet is positioned manually at front of the camera. The rivet profile's images are displaying on the screen. It also can be used with a PC to be a compact measuring system. Within VRM Image Archive Software, the computer offers a measurement. This should be sorted in the computer or printed out on a laserprinter.

	BPT-4 Bottle Ramp Pressure Tester
	BPT-3 Bottle Ramp Pressure Tester

	PU-2000 Pasteurization Temperature Monitor (PU Monitor)
	Features: 1) Not only able to monitor different kinds of bottled beer, but also the canned beer 2) Double communication channel, can measure both the inner bottle temperature and water temperature 3) Able to directly read the measuring results on the display screen of the main unit 4) Able to measure the killing PU value, total runtime and max. temperature 5) Print the temperature curves by connecting the data output device to PC

	CAN-1050d Digital Can Closing Force Gauge
	“CAN-1050d Can Closing Force Gauge” is for measuring the force of seaming head of the seaming machine. By using CAN-1050d, producers can avoid product defects caused by over plating: sharp edge, seam breakage, body deformation, body hook overlength, over large countersink and so on. In the meantime, producers can also avoid product defects caused by too small pallet lift force: slippery cans, too short hook and so on.

	GPG-100 Profile Gauge for Glass Bottle
	Key Benefits: (1) Tests on the bottle size - to prevent errors during producing (2) Radius (R2.4; R4; R0.5; R2.4) (3) Arc transition line angle (45 °) (4) Interval between Bottle cap positioning line and the bottle neck (3.85mm) (5) Suture burr height of Bottle ring (6) Diameter of the bottle mouth (7) Monitoring mold wear, determine when to replace. (8) Eradicate bad profile design

	ATT-100 Automatic Torque Tester
	AUTOMATED PART: this machine has for rule to realize controls of torques in laboratory or near the bottling line making total abstraction of the human factor during the measure. The operator has for rule only to put down the sample on the machine and press the start button.

	CND-TT-200 Torque Tester
	Applications: Food-industry / Cosmetic/ Pharmaceutical / Chemical / Metrology SPECIFICATIONS: 1) Utilization by Electroluminescent tactile screen 2) Programming by pull-down menu 3) Measures in screwing and unscrewing.( opening and closing ) 4) Units available : Kgf.cm / Inch.lbs / daN.cm / N.cm / N.m 5) Measuring range  A : from 00.00 to 99.99Kgf.cm / 9.999 N.m 6) and  0.050 to 3.999 Kgf.cm (in " accuracy " mode ) 7) and 0.001 to 2.999 on request ......

	DSST-100 Digital Secure Seal Tester
	The “Canneed DSST-100 Digital Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The DSST-100 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The DSST-100 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	DSST-100 Digital Secure Seal Tester
	The “Canneed DSST-100 Digital Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The DSST-100 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The DSST-100 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	DSST-100 Digital Secure Seal Tester
	The “Canneed DSST-100 Digital Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The DSST-100 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The DSST-100 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	CanNeed-SST-300 Secure Seal Tester(3 Stations)
	The “CanNeed-SST-300 Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	CanNeed-SST-300 Secure Seal Tester(3 Stations)
	The “CanNeed-SST-300 Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	CanNeed-SST-300 Secure Seal Tester(3 Stations)
	The “CanNeed-SST-300 Secure Seal Tester “is used to test seal integrity on the glass or plastic   containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.

	CCAT-100 Can Comprehensive Abrasion Tester
	It is used to evaluate the wear-resisting property for coating. After well clamped the sample can,adjust testing pressure load,and set testing frequency and time,CCAT-100 will imitate the clashing of cans, wearing-resisting property can be evaluated by observing.

	CTG-4000 Wet Film and Coating Thickness
	Application: 1. Test wet film and coating thickness,both save time and improve quality 2. Test both single layer and multilayer coating 3. Adopt non-contact optical technique,suitable for research,quality control and on-line control. 4. Can be used in Solar energe,optical coating,foods package,metal package field.Improve the quality by appearance,adhesion,resistant to corrosion and fricton,as well as scratch.

	CTG-4000 Wet Film and Coating Thickness
	Application: 1. Test wet film and coating thickness,both save time and improve quality 2. Test both single layer and multilayer coating 3. Adopt non-contact optical technique,suitable for research,quality control and on-line control. 4. Can be used in Solar energe,optical coating,foods package,metal package field.Improve the quality by appearance,adhesion,resistant to corrosion and fricton,as well as scratch.

	CTG-4000 Wet Film and Coating Thickness
	Application: 1. Test wet film and coating thickness,both save time and improve quality 2. Test both single layer and multilayer coating 3. Adopt non-contact optical technique,suitable for research,quality control and on-line control. 4. Can be used in Solar energe,optical coating,foods package,metal package field.Improve the quality by appearance,adhesion,resistant to corrosion and fricton,as well as scratch.

	EPS-100 End Profile Systems
	1) external diameter 2) internal diameter 3) pressure head matching diamter 4) end curl wideth ( non-destructive) 5) end curl height 6) end outer diamater 7) countersink 8) end flange 9) total height 10) angle

	CSRT-100 Coating Scratch Resistance Tester
	Under defined conditions, CSRT-100 is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.

	CBBT-100 Burst and Buckling Tester for Can
	In order to control the cost and quality,it is necessary for 2 piece can manufacturers to buy an equipment which can accurately test the compression strength and burst strength. CBBT-100 is used to test the pressures values of 2 piece cans:buckle value,burst value.Record the 2 values automatically. It can test different diamter and height of cans with different clamps.

	DER-4 Digital Enamel Rater
	DER-4 is the industry standard. The new CanNeed Enamel Rater DER-4 instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and also different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED. The CanNeed DER-4 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.

	CTG-200 Coating Thickness Gauge
	The Canneed's "CTG-200 Coating Thickness Gauge" provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans, and also tinplate.

	CND-TRK-300 Oven Temperature Tracker
	The CanNeed "CND-TRK-300 Oven Temperature Tracker" is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples. "CND-TRK-300 Oven Temperature Tracker" is use to pass through the oven with the solidifying products, and record down the real temperature during the process.

	CND-TRK-300 Oven Temperature Tracker
	The CanNeed CND-TRK-300 Oven Temperature Tracker is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.CanNeed CND-TRK-300 Oven Temperature Tracker is use to pass through the oven with the solidifying products, and record down the real temperature during the process.

	CAN-F-125 Pasteurization Temperature Monitor
	CanNeed CAN-F-125 Sterilization Temperature Monitor (F0 Value Monitor) has been chosen by many beverage and canned food factories. Applicable to different kinds of sterilization equipments and different place that require temperature monitoring: sterilization kettle (autoclave), Spray sterilization machine, Water sink sterilization machine, warehouse, transportation vehicles, etc.

	CAN-125B Pasteurization Temperature Monitor (PU Monitor)
	CanNeed CAN-85B, CAN-125B Pasteurization Temperature Monitor (PU Monitor), is the most advanced PU Monitor, high quality and powerful function. Either connect to the computer or connect to the data Processor for displaying the measuring results. The logger of CAN-85B, CAN-125B PU Monitor is portable and it was a stainless steel weldless one-piece design, which ensured its excellent sealability and long service life.

	WWP-100 Welding Seam Ball Press Tester
	Canneed "WWP-100 Welding Seam Ball Press Tester" is used to test the welding seam quality, including the welding seam strength and continuity of 3-piece cans.

	ZM-10 Digital Body Blank Gauge
	Canneed “ZM-10 Digital Body Blank Gauge” is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement.

	ZM-10 Digital Body Blank Gauge
	Canneed “ZM-10 Digital Body Blank Gauge” is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement.