Macro Sensors Position Sensor Selection Guide

To find the Macro Sensors product that most closely suits your application, choose your desired options from the categories in the column at left. The more specific your choices are, and the more categories you choose from, the more closely the list of products shown below will be filtered to match your requirements. If you have any questions or have any difficulty finding a standard product that meets your needs, please fill out the "Quick Contact" form below and tell us more about your application. Please also feel free to call us at

0915 980 479 or contact us through your email account at vinhmv.pitesco@gmail.com for additional assistance. Macro Sensors has a library of over 800 custom designs and our engineering team will be happy to help you find the best possible solution to your measurement challenges.

Spring Loaded LVDTs - General Purpose

GHSA/GHSAR 750 Series - GHSA/GHSAR 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These rugged, hermetically sealed sensors are constructed entirely of stainless steel, have either an axial or radial connector, and are intended for general industrial use.

Ranges of ±0.05" to ±2" [±1.25 mm to ±50 mm]
Repeatability of 0.000025" [0.60 µm] or better
Also available in air extend/spring retract versions (GHSAR-A)

GHSD/GHSDR 750 Series - GHSD/GHSDR 3/4 inch (19 mm) diameter LVDTs utilize built-in electronics that convert a ±15 V DC input into a precalibrated 0 to ±10V DC output. Like the GHSA/GHSAR AC versions, they are available in seven standard ranges from ±0.020" [±0.51 mm] to ±2.00" [±50 mm] and include either axial or radial connectors.

Precalibrated ranges of ±0.02" to ±2.00" [±0.51 mm to ±50 mm]
Repeatability of 0.000025" [0.60 µm] or better
Also available in air extend/spring retract versions (GHSDR-A)

GHSE/GHSER 750 Series - GHSE/GHSER 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our other general purpose spring loaded LVDTs, but are powered by a nominal 24 V DC input and are available in six standard precalibrated ranges from 0.100" [2.5 mm] to 4.00" [100 mm] with an output from 0-10V DC.

Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm]
Repeatability of 0.000025" [0.60 µm] or better
Also available in air extend/spring retract versions (GHSER-A)

GHSI/GHSIR 750 Series - GHSI/GHSIR 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our other general purpose spring loaded LVDTs, along with the convenience and simplicity of precalibrated 4-20 mA current loop operation. Units operate as 2-wire loop powered or 3-wire sourcing externally powered.

Precalibrated ranges of 0.10" to 4.00" [2.5 mm to 100 mm]
Repeatability of 0.0001" [2.50 µm] or better
Also available in air extend/spring retract versions (GHSIR-A)

Spring Loaded LVDTs - Ultrahigh Precision Gaging Probes

BB Series - Macro Sensors BB Series LVDT-Based Dimensional Gaging Probes provide ultra-precise measurement of the position of a targeted surface in a wide variety of quality control and industrial metrology applications, including online parts inspection, servo-loop positioning systems, and manufacturing process control.

Ultra-precise assembly gives repeatability of less than 0.000006" (0.15 μm)
Ranges from ±0.020” (±0.5 mm) to ±0.200” (±5.0 mm)
Available in full bridge or half bridge

Spring Loaded LVDTs - Short Range Economy

GSA Series - The GSA 750 series of short range spring loaded position sensors were developed for cost sensitive applications requiring LVDT reliability and performance. Available in ranges of ±0.10 inches to ±0.30 inches, these sensors offer the excellent measurement capabilities of an LVDT at very economical prices.

Ranges of ±0.100" to ±0.300" [±2.5 mm to ±7.5 mm]
Non-linearity less than ±0.5% of FRO
220°F (105°C) operating temperature

Separate Core LVDTs - Miniature

CD Series - Macro Sensors’ CD 375 Series of 3/8 inch (9.5 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. The low mass of their cores makes these miniature LVDTs well suited for high response dynamic measurements.

Miniature 3/8 inch size, low core mass
Ranges of ±0.025" to ±1.0" [±0.63 mm to ±25 mm]
Available in high pressure & high temperature configurations

MD Series - Macro Sensors’ MD 188 Series of 3/16 inch (4.75 mm) diameter AC-operated LVDTs are small size contactless linear position sensors for both OEM and end user applications. The low mass of their cores makes these miniature LVDTs well suited for high response dynamic measurements. (Contact Factory for Information)

Miniature 3/16 inch size, low core mass
Ranges of ±0.020" to ±0.100" [±0.50 mm to ±2.5 mm]
±0.5% maximum linearity error

Separate Core LVDTs - General Purpose

PR Series - Macro Sensors’ PR 750 Series of 3/4" (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements. PR 812 Series AC LVDTs are 0.812" (20.6 mm) diameter versions are designed primarily for use in legacy OEM applications.

Available in 0.750" or 0.812" diameters
Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
Non-linearity less than ±0.25%

SE Series - SE 750 Series 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of DC input and precalibrated DC output.

Ranges from 0.100 inch [2.5 mm] to 20.00 inches [500 mm]
24 V DC input, true 0-10 V DC output
Non-linearity less than or equal to ±0.25% of FSO (±0.10% optional)

DC Series - DC 750 Series 3/4 inch (19 mm) DC-operated LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of DC input and precalibrated DC output.

Ranges from ±0.050 inch [±1.25 mm] to ±10 inches [±250 mm]
±15 V DC input, 0 to ±10 V DC output
Non-linearity less than or equal to ±0.25% of FSO

SI Series - SI 750 Series 3/4 inch (19 mm) LVDTs are designed for a wide range of position measurement applications. They use built-in electronics to provide the desirable features of an AC-LVDT, such as frictionless operation and dynamic response, with the simplicity of a precalibrated 4-20 mA current loop operation.

Ranges of 1 inch [25 mm] to 20 inches [500 mm]
4-20 mA current loop operation
Non-linearity of ±0.25% of FRO or better

Separate Core LVDTs - Hermetically Sealed

HSA 750 Hermetically Sealed Position Sensor

HSA/HSAR 750 Series - HSA/HSAR 750 Series 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors that are constructed entirely of stainless steel. Electrical termination is through a sealed axial or radial connector.

Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
±0.25% maximum linearity error
In-line design; mating plug for connector included

HSD/HSDR 750 Series - HSD/HSDR 750 Series of 3/4 inch (19 mm) diameter DC-LVDTs use built-in electronics to provide the advantages of an LVDT, such as frictionless operation and dynamic response, with the convenience of DC input and precalibrated DC output. Electrical termination is through a hermetically sealed axial or radial connector.

Ranges of ±0.015" to ±10" [±0.38 mm to ±250 mm]
±15 V DC input, precalibrated 0 to ±10 V DC output
Non-linearity less than ±0.25% of FRO

HSE/HSER 750 Series - HSE/HSER 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our hermetically sealed separate core LVDTs, but are powered by a nominal 24 V DC input and are available in standard precalibrated ranges from 0.100" [2.5 mm] to 20.00" [500 mm] with an output from 0-10V DC. Axial or radial connectors available.

24 V DC input, precalibrated 0 to 10 V DC output
Precalibrated ranges of 0.100" to 20.00" [2.5 mm to 500 mm]
Non-linearity less than or equal to ±0.25% of FSO (±0.10% optional)

HSI/HSIR 750 Series - HSI/HSIR 3/4 inch (19 mm) diameter LVDTs offer all the advantages of our hermetically sealed separate core LVDTs, along with the simplicity of precalibrated 4-20 mA current loop operation. Units operate as 2-wire loop powered or 3-wire sourcing externally powered. Axial or radial connectors available.

4 to 20 mA input/output
Ranges of 1.00" to 10.00" [25 mm to 250 mm]
Non-linearity of ±0.25% of FRO or better (±0.10% optional)

Separate Core LVDTs - Hazardous Locations

SQ Series - SQ 1250 Series heavy duty LVDTs have their electrical assembly totally encapsulated within a heavy duty aluminum housing, with their electrical connections made to screw-terminal style barrier strips. They meet the IEC IP-64 sealing standard against the intrusion of splashed water and other liquids.

Ranges of ±0.50 inches to ±10.00 inches [±12.5 mm to ±250 mm]
Non-linearity less than ±0.25% of FRO
300°F (150°C) operating temperature

HSTA 750 Series - HSTA 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). Termination is through a sealed axial connector.

Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
400°F (200°C) operating temperature
Optional capability to withstand exposure to mild radiation (3x10⁷ Rads)

HSTAR 750 Series - HSTAR 750 Series of 3/4 inch (19 mm) diameter AC-operated LVDTs are designed for a wide range of position measurement applications. These are rugged hermetically sealed sensors, constructed entirely of stainless steel, and intended for use at high temperatures (400°F). Termination is through a sealed radial connector.

Ranges of ±0.05" to ±10" [±1.25 mm to ±250 mm]
400°F (200°C) operating temperature
Optional capability to withstand exposure to mild radiation (3x10⁷ Rads)

HLR 750 Series - HLR 750 Series 3/4 inch (19 mm) diameter hermetically sealed AC-LVDTs are listed for [Class 1, Division 1, Groups A, B, C, D and Class 1, Zone 2, Group IIC Hazardous Locations] -or- [Class 1, Division 2, Groups A, B, C, D and Class 1, Zone 2, Group IIC Hazardous Locations] by Underwriters Laboratories.

ATEX & UL/ULc Listed
212°F (100°C) Temp for Class 1, Div 1; 300°F (150°C) for Class 1, Div 2
Ranges of ±1.00 inches to ±10.00 inches [±25 mm to ±250 mm]

Separate Core LVDTs - Subsea/Submersible

SS 937 Series - Due to their extraordinary repeatability despite variations in pressure and temperature, SS 937 Series submersible LVDTs are ideal for incorporation into a wide variety of subsea measurement systems. These rugged, .94 inch [nom.] (24 mm) diameter sensors are available in standard ranges of 2.00 inches, 3.00 inches, or 4.00 inches.

Inconel construction standard
High pressure applications (to 5,000 psi)
4-20mA two-wire, loop-powered I/O

Rotary Position Sensors - High Accuracy

RSE 1500 Series - RSE 1500 series sensors provide an analog voltage output proportional to shaft rotation over a total range of 120°. They utilize built-in electronics offering DC input/output configurations and are available for 0° to 30°, 60°, 90°, or 120° rotation ranges with a true 0-10 V DC unipolar output.

Full 360° rotation contactless technology
True 0-10 V DC unipolar output
Non-linearity less than ±0.1% of FRO

Kho Tự Động Hoá - Pitesco Vietnam

Thứ Ba, 22 tháng 10, 2013