Gear flow-divider MTO | MTO-4-31-AVR280 (MTO-4-31-A280) | Piston flow-divider valve | MKS-2/150 | Jahns Hydraulik Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

Gear flow-divider MTO (aluminium housing)

Gear flow-divider MTO | MTO-4-31-AVR280 (MTO-4-31-A280) | Piston flow-divider valve | MKS-2/150 | Jahns Hydraulik Vietnam Available from 2 to 12 sections in two sizes. Partial oil flow rates from 2 l/min to 62 l/min per section. Maximum working pressures from 210 to 250 bar. Within each size there are different displacements. The dimensions of the sections vary with their displacement in the length of the housing. The sections are executed with an internal connection and every second chamber has an inlet port. We offer two different executions: Version A – is executed with an into the housing integrated combined pressure relief and suction valve. Version G - is without this valve. Size Type Displacement per section Flow per section Working pressure minimum maximum Continuous Peak (cm3/rev.) (l/min) (l/min) (bar) (bar) 1 MTO-..- 4 4,2 1,6 9 250 280 1 MTO-..- 5 5,5 2,2 12 230 250 2 MTO-..- 8 8,16 3,5 19 250 280 2 MTO-..- 14 14,45 5,0 32 250 280 2 MTO-..- 31 31,4 12,5 62 210 240

Gear flow divider MTO (cast iron housing)

Gear flow-divider MTO | MTO-4-31-AVR280 (MTO-4-31-A280) | Piston flow-divider valve | MKS-2/150 | Jahns Hydraulik Vietnam Available from 2 to 12 sections in two sizes. The housings are made from cast iron. Partial oil flow rates from 16 l/min to 220 l/min per section. Maximum working pressures from 235 to 270 bar. Within each size there are different displacements. The dimensions of the sections vary with their displacement in the length of the housing. We offer two different executions: Version EA – with in- and outlet blocks for endposition compensation made from steel (EA9) or aluminum (EA7). The sectional inletblocks are manufactured with an internal connection and variable usable inlet ports. The outlet blocks have integrated pressure relief valves for seondary loop protection, suction valves and measuring ports for each section. Version G/S - is without blocks and valves. Size Type Displacement per section Flow per section Working pressure minimum maximum Continuous Peak (cm3/rev.) (l/min) (l/min) (bar) (bar) 3 MTO-..- 25 24,9 12 66 270 290 3 MTO-..- 35 34,3 16 82 260 285 3 MTO-..- 55 54,5 27 98 260 285 3 MTO-..- 80 78,7 40 140 260 285 4 MTO-..- 110 105,4 50 200 270 290 4 MTO-..- 150 149,7 80 220 235 250 The in- and outlet blocks made from steel (EA9) or aluminum (EA7) have integrated pressure relief valves for seondary loop protection, suction valves and measuring ports for each section. Gear flow-divider MTO | MTO-4-31-AVR280 (MTO-4-31-A280) | Piston flow-divider valve | MKS-2/150 | Jahns Hydraulik Vietnam Size In-and outlet blocks made from Aluminium Steel Steel (phased out) 3 EA7 EA9 EA8 4 EA9 EA8