Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong
D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh
Tell : 0915.980.479
0162.999.888.7
Email : vinhmv.pitesco@gmail.com
Website: www.pitesvietnam.com
www.sensor-encoder.com
GEL 500-S
The fi n-couplings DIN.AL., belonging to series “GEL- 500-S” are usually used for the connection of tachogenerators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required and where an absolute torque rigidity is required, even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys. Patanted in Italy, Germany and France.
Data Sheet
The fi n-couplings DIN.AL., belonging to series “GEL- 500-S” are usually used for the connection of tachogenerators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required and where an absolute torque rigidity is required, even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys. Patanted in Italy, Germany and France.
Data Sheet
Data Sheet
GEL 100-S
The fi n-couplings DIN.AL., belonging to series “GEL- 100-S” are usually used for the connection of tachogenerators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required and where an absolute torque rigidity is required, even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys. Patanted in Italy, Germany and France.
Data Sheet
The fi n-couplings DIN.AL., belonging to series “GEL- 100-S” are usually used for the connection of tachogenerators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required and where an absolute torque rigidity is required, even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys. Patanted in Italy, Germany and France.
Data Sheet
Data Sheet
GEL 5000-C
The double hubs, one internal and the other external, make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The double hubs, one internal and the other external, make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 5000 R-C
The double hubs, one internal and the other reduced external, make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The double hubs, one internal and the other reduced external, make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 3000-C
The outer double hubs make it possible to connect large shafts and easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The outer double hubs make it possible to connect large shafts and easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 3000 R-C
The DIN.AL fi n couplings of the GEL 3000 R series have short outer double hubs which make it possible to connect large shafts, overall dimensions being very small. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The DIN.AL fi n couplings of the GEL 3000 R series have short outer double hubs which make it possible to connect large shafts, overall dimensions being very small. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL1000-C
The connection of the two hubs to a central body of a given size ensures the same elasticity, yet very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The connection of the two hubs to a central body of a given size ensures the same elasticity, yet very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 1000 R-C
The DIN.AL. fi n couplings of the GEL 1000 R series have the connection of the two hubs to a central body of a given size which ensures the same elasticity, yet very small overall dimensions. A key and screw version is also available.They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The DIN.AL. fi n couplings of the GEL 1000 R series have the connection of the two hubs to a central body of a given size which ensures the same elasticity, yet very small overall dimensions. A key and screw version is also available.They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 2000-C
The direct connection of the two hubs ensures very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The direct connection of the two hubs ensures very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 2000 R-C
The direct connection of the two hubs ensures very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The direct connection of the two hubs ensures very small overall dimensions. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
GEL 4000-C
The double hubs inside the body ensure small overall dimensions and the same elasticity. The large bores on the central body make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
The double hubs inside the body ensure small overall dimensions and the same elasticity. The large bores on the central body make it easy to reach the fastening screws. A key and screw version is also available. They are used to connect tachogenerators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.
Data Sheet
Data Sheet
Không có nhận xét nào:
Đăng nhận xét