02700D1 | Servomex Vietnam | SERVOTOUGH FluegasExact

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Contacs: Mai Văn Vinh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

Servomex Vietnam SERVOTOUGH FluegasExact 

SERVOTOUGH FluegasExact Comb. Analyser
02700D1
CONTROLLER TYPE
GEN	Safe Area
EU2	Haz. Area ATEX Cat 3
EX2	Haz. Area IEC Ex Zone 2
NA2	N. American CL 1 DIV 2
SENSOR HEAD TYPE
GEN	Safe Area
EU2	Haz. Area ATEX Cat 3
EX2	Haz. Area IEC Ex Zone 2
MINI PURGE
	Not Required
	MiniPurge ATEX Cat 3 / IEC Ex Zone 2
	Supplied by others
MEASUREMENT
	Oxygen Only
	Oxygen Only, pcb Enhanced Environmental Protection
	Combustibles Only
	Combustibles Only, pcb Enhanced Environmental Protection
	Oxygen & Combustibles
	Oxygen & Combustibles, pcb Enhanced Environmental Protection
COMBUSTIBLES SENSOR	High Sensitivity
	Sulphur Resistant
FLOW ALARM
	Not Required
	Safe Area
	Haz. Area ATEX Cat 3
	Haz. Area IEC Ex Zone 2
	N. American CL 1 DIV 2
SUPPLY VOLTAGE
	110V ac
	240V ac
SAMPLE PROBES
	None
	0.5m SS sample probe, unsupported, open ended, <700°C/1292°F
	1.0m SS sample probe, unsupported, open ended, <700°C/1292°F
	1.5m, SS sample probe, unsupported, open ended, <700°C/1292°F (Vertical Mount Only)
	0.5m SS sample probe, unsupported, filtered, <700°C/1292°F
	1.0m SS sample probe, unsupported, filtered, <700°C/1292°F
	1.5m, SS sample probe, unsupported, filtered, <700°C/1292°F (Vertical Mount Only)
	0.5m SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	1.0m SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	1.5m SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	2.0m SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	2.5m, SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	3.0m, SS sample probe, supported, filtered, with shroud,  <700°C/1292°F
	0.5m High Temperature Alloy, sample probe, unsupported, open ended, <1000°C/1832°F
	1.0m High Temperature Alloy, sample probe, unsupported, open ended, <1000°C/1832°F
	1.5m, High Temperature Alloy, sample probe, unsupported, open ended, <800°C/1472°F  (Vertical Mount Only)
	2.0m, High Temperature Alloy, sample probe, unsupported, open ended, <700°C/1292°F  (Vertical Mount Only)
	0.5m High Temperature Alloy, sample probe, unsupported, filtered, <1000°C/1832°F
	1.0m High Temperature Alloy, sample probe, unsupported, filtered, <1000°C/1832°F
	1.5m High Temperature Alloy, sample probe, unsupported, filtered (Vertical Mount Only)
	2.0m High Temperature Alloy, sample probe, unsupported, filtered (Vertical Mount Only)
	0.6m, Ceramic, sample probe, unsupported, filtered, <1500°C/2732°F **Special - Consult Servomex
	1.1m, Ceramic, sample probe, unsupported, filtered, <1500°C/2732°F **Special - Consult Servomex
	0.5m Ceramic, sample probe, open ended, <1750°C/3182°F
	1.0m Ceramic, sample probe, open ended, <1750°C/3182°F
	1.5m Ceramic, sample probe, open ended, <1750°C/3182°F (Vertical Mount Only)
	0.5m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	1.0m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	1.5m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	2.0m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	2.5m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	3.0m, SS sample probe, supported, dual filtered, with shroud, <700°C/1292°F
	0.5m, Hastelloy, sample probe, unsupported, open
	1.0m, Hastelloy, sample probe, unsupported, open
	1.5m, Hastelloy, sample probe, unsupported, open (Vertical Mount Only)
	Non Standard sample probe - refer to Servomex
INTERNAL FILTER 5um
	Fitted
INTERNAL FLAME ARRESTORS
	Fitted
ELECTRICAL CONDUIT ENTRIES
	3/4"NPT (O2 and COe)
	M20 (O2 or COe)
	M25 (O2 and COe)
	PG13.5 (O2 or COe)
	PG21 (O2 and COe)
SENSOR HEAD ENCLOSURE OPTION
	Breather Fittings
	Corrosive Purge Fittings
	Hazardous Area Purge Fittings
	Special Sensor Head Purge O2 Only - contact Servomex
	Special Sensor Head Purge Dual - contact Servomex
SENSOR HEAD MOUNTING OPTION
	Standard (4"ANSI 150lbs)
	Probe Retention (excluding supported probes)
	Thermal Spacer (excluding supported probes)
	Probe Retention & Thermal Spacer (excluding supported probes)
	High Temperature Stand Off (excluding supported probes)
	High Temperature Stand Off & Probe Retention (excluding supported probes)
SENSOR HEAD ADAPTOR FLANGE OPTION
	No Adaption (4"ANSI 150lbs)
	3" ANSI 150lbs equivalent
	DIN 65 equivalent
	DIN 80 equivalent
	JIS 65 equivalent
	JIS 80 equivalent
	Weld -On flange complete with studs (4" ANSI 150lbs equivalent)
	Model 700B/N to 2700 adaptor flange (excluding High Temperature Stand Off)
	Thermox to 2700 adaptor flange (excluding Supported Probes)
CONTROL UNIT MOUNTING
	Wall Mounted
CONTROL UNIT ENCLOSURE OPTIONS
	Blanking Plugs Only
	Breather Port
	Corrosive Purge Fittings
UTILITIES UNITS - SAFE
	None
	Air Set (Oxygen Only)
	Air Set with Autocalibration (Single sensor)
	Air Set with Autocalibration (Dual sensor)
	Air Set with Blowback and Autocalibration (Single sensor)
	Air Set with Blowback and Autocalibration (Dual sensor)
	Air Set and Manual Calibration (Single & Dual sensor)
USER MANUALS
	English
	French (currently undergoing translation) - Please consult Servomex
	German (currently undergoing translation) - Please consult Servomex
SERVICE MANUAL
	None
	English
DEFAULT SOFTWARE INTERFACE LANGUAGE
	English
	French
	German
2930A SERVOTOUGH LaserSP
02930A1	SERVOTOUGH LaserSP
CONFIGURATION
	Single Path
AREA CLASSIFICATION
	Safe Area
	ATEX  and IECEx Cat 3 Gas (Zone 2) Cat 2 Dust (Zone 21)
	ATEX Cat. 2G (Zone 1)
	CSA general purpose
	CSA Class 1, Division 2
MEASUREMENT
Single Path monitors	Measurement
	CO SERVOTOUGH LaserSP Monitor (carbon monoxide)
	CO SERVOTOUGH LaserSP Monitor, low level detection limit 0.3ppm (carbon monoxide)
	CO2 SERVOTOUGH LaserSP Monitor (carbon dioxide)
	CO2 SERVOTOUGH LaserSP Monitor<400ppm (carbon dioxide)
	NH3 SERVOTOUGH LaserSP Monitor (ammonia)
	HF SERVOTOUGH LaserSP Monitor (hydrogen fluoride)
	HCl SERVOTOUGH LaserSP Monitor (hydrogen chloride)
	H2O SERVOTOUGH LaserSP Monitor 50ppm (water)
	H2S SERVOTOUGH LaserSP Monitor (hydrogen sulphide)
	CH4 SERVOTOUGH LaserSP Monitor (methane)
	HCN SERVOTOUGH LaserSP Monitor (hydrogen cyanide)
	C3H6 SERVOTOUGH LaserSP Monitor (propylene)
	C2H4O SERVOTOUGH LaserSP Monitor (ethylene oxide)
	CH2O SERVOTOUGH LaserSP Monitor (formaldehyde)
	C2H2 SERVOTOUGH LaserSP Monitor (acetylene)
	CH3I SERVOTOUGH LaserSP Monitor (methyl iodide)
	N2O SERVOTOUGH LaserSP Monitor (nitrous oxide)
	N2O SERVOTOUGH LaserSP Monitor (ppm nitrous oxide)
MEASURING RANGE
	Please state
MEASUREMENT UNITS
	mg/m3
	ppm
	% vol
DUAL MEASUREMENT
	Not Required
	H2O dual gas add-on as second gas (for HF, HCl, NH3 and CO) Note: For CO only for Temp below 200C or above 700C
	Dual gas add-on CH4 option as second gas
	Dual gas, add on CO2 as second gas (for CO)
	Dual gas, add on temperature (for O2 and CO)
DUAL MEASURING RANGE
	Please state
DUAL MEASUREMENT UNITS
	mg/m3
	ppm
	% vol
	Celsius
	Gas Component 1
	Stream Comp 1 Normal Range
	Stream Comp 1 Low Range
	Stream Comp 1 High Range
	Process Dust (mg/m3)
	Process Flow (m3/h)
	Process Velocity (m/sec)
	Process Opacity (%)
	Stream Temperature (°C)
	Ambient Temperature (°C)
	Trans/Rec Cable 10m (5m supplied as standard)
	Trans/Rec Cable 15m (5m supplied as standard)
	Trans/Rec Cable 20m (5m supplied as standard)
	TU/RU Connecting Cable 5-20m (per metre). 5m supplied as standard.
	TU Optical Path Length L1 (mm)
	Stack Diameter L2 (mm)
	RU Optical Path Length L3 (mm)
PROCESS PRESSURE UNITS
	mbar
	bar
PROCESS PRESSURE (bar)
	Please specify
OPTICAL WINDOW PURGING
	None (low dust)
	Instrument Air
	Fan
	N2 (low level O2)
	Steam
SUPPLY VOLTAGE
	110Vac 50/60Hz
	220Vac 50/60Hz
	24Vdc
HIGH TEMPERATURE APPLICATIONS
	High temp. O2/CO2/CO applications(>700C) RU Filter mounted/tested
	13606 High Temp O2 with Air Purge (>500C)
MOUNTING FLANGE
	DN50/PN10 (SP Standard)
	DN80/PN10, pair
	ANSI 2"/150lbs, pair
	ANSI 3"/300lbs, pair
	ANSI 4" 150/300lbs, pair
	Other (Specify)
SPECIAL FLANGE O-RINGS	21031 DN50 Flange 0-ring, 65.0x10.0, PTFE (Teflon)  Max 250C
	21033 DN50 Flange 0-ring, 65.0x10.0, FKM (Viton)  Max 200C
	21034 DN80 Flange 0-ring, 95.0x10.0, FKM (Viton)  Max 200C
TU MOUNTING
	Indoor
	Outdoor
CALIBRATION CELL
	Stainless Steel (316) For corrosive gases (except HF)
	Stainless Steel (316) For corrosive gases (except HF) electropolished
	Cal cell for O2 (Al) For non-corrosive gases
	Cal cell for HF (AI/PTFE)
MEASUREMENT CELL
	Order measurement cell as separate item: See 02930964 measurement price list below.
TRANSMISSION OUTPUT
	Additional 4-20mA for Trans o/p
	Auxiliary board including one 4-20mA
	Second and third 4-20mA analogue output (13474 is required for this option)
ETHERNET OUTPUT
	Ethernet Connection (without cable)
ADDITIONAL NETWORK CABLE
	Network Cable 15m (including connectors) straight
	Network Cable 15m (including connectors)cross-over
TU/RU PURGING
	None (Blanked)
	N2 Fittings (Low Level O2)
2nd PURGE PORT FITTING
	Option for 2 purge fitting on each purge/alignment unit
HIGH PRESSURE WINDOW >5 BAR
	High Pressure Window for O2 HP O2 measurement
ALIGNMENT TOOLS
	Alignment jig w/target
	IR Card (not suitable for HCl, NO, Low conc CO, CO2)
PURGE GAS FILTRATION
	Purge Gas Filter Unit
INTEGRATED SPAN CHECK
	Span check (for non corrosive gases only) incl. switch box.  Check application feasability with Technical Centre before quoting.
	Fixed internal sealed cell (Laser tracking typically for "zero" type applications) Check application feasability with Technical Centre before quoting.
	Span check with internal sealed cell. Check application feasability with Technical Centre before quoting.
2 YEARS SPARES KIT
	2 years spares kit
CERTIFICATE OF ORIGIN
	Certificate of origin (May be required for FAT by customer)