Model T30 | KLINGAGE Transparent Liquid Level Gages | Nihon Klingage Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

Direct Reading Liquid Level Gages

Transparent Liquid Level Gages
Model T30

KLINGAGE Transparent Liquid Level Gages

One sheet of flat tempered glass（for Water Level Gages JIS B8211） is mounted on each side of the liquid chamber and held between gage covers. The liquid level,interface level and liquid color can be observed by differential transmission of light emitted from the illuminator behind the page.
In Direct Reading Liquid Level Gages, we recommend the watch only of the liquid surface Reflex Liquid Level Gages.

Features
Transparent liquid level gages are applicable to almost all liquids,especially for observation of interface between two liquids,observation of liquid color,and liquids and steam which require corrosion protection by shielding with mica or fluorocarbon resin.
For KLINGAGE Transparent Liquid Level Gages to be able to correspond to the damaging of unexpected glass and so on, the standard is equipped with upper and lower Check Ball Valve basic-ly.
Get in touch because it manufactures even if the special material such as carbon steel (S25C､A105), stainless steel (SUS304､SUS316､SUS304L､SUS316L), various resin lined, the other titanium, Monel, Hastelloy has as wetted part material.

As the option, we prepare in the scale board ( the scale: made from SUS304, AL ), various protect ( the mica plate, the FEP sheet, clear court glass ), the ultraviolet ray cut plate, the light-shielding box, the illumination receptacle ( Explosion-proof ,Non-explosion-proof ), the installation support and so on.
It assorts variations such as the jacket type, non- frosting for the low temperature, the big diameter type ( the large chamber type ), Zigzag, too, richly.

Zigzag Liquid Level Gages
Model RS40W-WA16B-21

KLINGAGE Zigzag Liquid Level GagesKLINGAGE zigzag gages are characterized by alternate arrangement of gages in a double line which enables continuous liquid level observation over the whole visible range. Therefore, wide range liquid level measurement is possible.These gages are used for equipment which requires a full range observation in addition to storage tanks for LPG,butane etc.Also, it is used as Direct Reading Liquid Level Gages of the equipment kind to want to avoid an invisible part, too.Both reflex and transparent types are available.For KLINGAGE Zigzag Liquid Level Gages to be able to correspond to the damaging of unexpected glass and so on, it is equipped with Check Ball Valve up and down with the standard.Get in touch because it manufactures even if the special material such as carbon steel (S25C､A105), stainless steel (SUS304､SUS316､SUS304L､SUS316L), various resin lined, the other titanium, Monel, Hastelloy has as wetted part material.As the option, it is a scale board ( the scale: made from SUS304, AL ), TeflonR (PFA) Coat Glass - KLEARCOATR Glass, V-notched Color Glass ( Bi-KC glass ), the installation support and so on.The figure on the left is the one to have used V-notched Color Glass ( Bi-KC glass ).It recommends the remote watch of low-boiling fluid such as LPG (Magnet Float) Type Level Gage low-boiling point MGB for LPG type(Double tube type) of MG which it is possible to adopt in the lead switch, the level detector ( the transmission of 4 - 20 mA of AnalogSensorDC ) in liquid surface watch.